ESP8266 Module 12
>Value
>Name
ESP 12-Q
>Name
>Value
ESP8266 Wifi module 12-Q
<h3>SparkFun Power Symbols</h3>
This library contains power, ground, and voltage-supply symbols.
<br>
<br>
We've spent an enormous amount of time creating and checking these footprints and parts, but it is <b> the end user's responsibility</b> to ensure correctness and suitablity for a given componet or application.
<br>
<br>If you enjoy using this library, please buy one of our products at <a href=" www.sparkfun.com">SparkFun.com</a>.
<br>
<br>
<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/
<br>
<br>
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.
<h3>Digital Ground Supply</h3>
>VALUE
<h3>Ground Supply Symbol</h3>
<p>Generic signal ground supply symbol.</p>
<KMR243GLFG (Tactile Switches)</b><p>
<author>Created by SamacSys</author>
<b>KMR421GULCLFS-1</b><br>
>NAME
>VALUE
>NAME
>VALUE
<b>KMR243GLFG (Tactile Switches)</b><p>
Source: <a href="https://www.ckswitches.com/media/1479/kmr2.pdf"> Datasheet </a>
<b>Resistors, Capacitors, Inductors</b><p>
Based on the previous libraries:
<ul>
<li>r.lbr
<li>cap.lbr
<li>cap-fe.lbr
<li>captant.lbr
<li>polcap.lbr
<li>ipc-smd.lbr
</ul>
All SMD packages are defined according to the IPC specifications and CECC<p>
<author>Created by librarian@cadsoft.de</author><p>
<p>
for Electrolyt Capacitors see also :<p>
www.bccomponents.com <p>
www.panasonic.com<p>
www.kemet.com<p>
http://www.secc.co.jp/pdf/os_e/2004/e_os_all.pdf <b>(SANYO)</b>
<p>
for trimmer refence see : <u>www.electrospec-inc.com/cross_references/trimpotcrossref.asp</u><p>
<table border=0 cellspacing=0 cellpadding=0 width="100%" cellpaddding=0>
<tr valign="top">
<! <td width="10"> </td>
<td width="90%">
<b><font color="#0000FF" size="4">TRIM-POT CROSS REFERENCE</font></b>
<P>
<TABLE BORDER=0 CELLSPACING=1 CELLPADDING=2>
<TR>
<TD COLSPAN=8>
<FONT SIZE=3 FACE=ARIAL><B>RECTANGULAR MULTI-TURN</B></FONT>
</TD>
</TR>
<TR>
<TD ALIGN=CENTER>
<B>
<FONT SIZE=3 FACE=ARIAL color="#FF0000">BOURNS</FONT>
</B>
</TD>
<TD ALIGN=CENTER>
<B>
<FONT SIZE=3 FACE=ARIAL color="#FF0000">BI TECH</FONT>
</B>
</TD>
<TD ALIGN=CENTER>
<B>
<FONT SIZE=3 FACE=ARIAL color="#FF0000">DALE-VISHAY</FONT>
</B>
</TD>
<TD ALIGN=CENTER>
<B>
<FONT SIZE=3 FACE=ARIAL color="#FF0000">PHILIPS/MEPCO</FONT>
</B>
</TD>
<TD ALIGN=CENTER>
<B>
<FONT SIZE=3 FACE=ARIAL color="#FF0000">MURATA</FONT>
</B>
</TD>
<TD ALIGN=CENTER>
<B>
<FONT SIZE=3 FACE=ARIAL color="#FF0000">PANASONIC</FONT>
</B>
</TD>
<TD ALIGN=CENTER>
<B>
<FONT SIZE=3 FACE=ARIAL color="#FF0000">SPECTROL</FONT>
</B>
</TD>
<TD ALIGN=CENTER>
<B>
<FONT SIZE=3 FACE=ARIAL color="#FF0000">MILSPEC</FONT>
</B>
</TD><TD> </TD>
</TR>
<TR>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3 >
3005P<BR>
3006P<BR>
3006W<BR>
3006Y<BR>
3009P<BR>
3009W<BR>
3009Y<BR>
3057J<BR>
3057L<BR>
3057P<BR>
3057Y<BR>
3059J<BR>
3059L<BR>
3059P<BR>
3059Y<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
89P<BR>
89W<BR>
89X<BR>
89PH<BR>
76P<BR>
89XH<BR>
78SLT<BR>
78L ALT<BR>
56P ALT<BR>
78P ALT<BR>
T8S<BR>
78L<BR>
56P<BR>
78P<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
T18/784<BR>
783<BR>
781<BR>
-<BR>
-<BR>
-<BR>
2199<BR>
1697/1897<BR>
1680/1880<BR>
2187<BR>
-<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
8035EKP/CT20/RJ-20P<BR>
-<BR>
RJ-20X<BR>
-<BR>
-<BR>
-<BR>
1211L<BR>
8012EKQ ALT<BR>
8012EKR ALT<BR>
1211P<BR>
8012EKJ<BR>
8012EKL<BR>
8012EKQ<BR>
8012EKR<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
2101P<BR>
2101W<BR>
2101Y<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
2102L<BR>
2102S<BR>
2102Y<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
EVMCOG<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
43P<BR>
43W<BR>
43Y<BR>
-<BR>
-<BR>
-<BR>
-<BR>
40L<BR>
40P<BR>
40Y<BR>
70Y-T602<BR>
70L<BR>
70P<BR>
70Y<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
RT/RTR12<BR>
RT/RTR12<BR>
RT/RTR12<BR>
-<BR>
RJ/RJR12<BR>
RJ/RJR12<BR>
RJ/RJR12<BR></FONT>
</TD>
</TR>
<TR>
<TD COLSPAN=8>
</TD>
</TR>
<TR>
<TD COLSPAN=8>
<FONT SIZE=4 FACE=ARIAL><B>SQUARE MULTI-TURN</B></FONT>
</TD>
</TR>
<TR>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>BOURN</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>BI TECH</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>DALE-VISHAY</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>PHILIPS/MEPCO</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>MURATA</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>PANASONIC</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>SPECTROL</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>MILSPEC</B></FONT>
</TD>
</TR>
<TR>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
3250L<BR>
3250P<BR>
3250W<BR>
3250X<BR>
3252P<BR>
3252W<BR>
3252X<BR>
3260P<BR>
3260W<BR>
3260X<BR>
3262P<BR>
3262W<BR>
3262X<BR>
3266P<BR>
3266W<BR>
3266X<BR>
3290H<BR>
3290P<BR>
3290W<BR>
3292P<BR>
3292W<BR>
3292X<BR>
3296P<BR>
3296W<BR>
3296X<BR>
3296Y<BR>
3296Z<BR>
3299P<BR>
3299W<BR>
3299X<BR>
3299Y<BR>
3299Z<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
66P ALT<BR>
66W ALT<BR>
66X ALT<BR>
66P ALT<BR>
66W ALT<BR>
66X ALT<BR>
-<BR>
64W ALT<BR>
-<BR>
64P ALT<BR>
64W ALT<BR>
64X ALT<BR>
64P<BR>
64W<BR>
64X<BR>
66X ALT<BR>
66P ALT<BR>
66W ALT<BR>
66P<BR>
66W<BR>
66X<BR>
67P<BR>
67W<BR>
67X<BR>
67Y<BR>
67Z<BR>
68P<BR>
68W<BR>
68X<BR>
67Y ALT<BR>
67Z ALT<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
5050<BR>
5091<BR>
5080<BR>
5087<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
T63YB<BR>
T63XB<BR>
-<BR>
-<BR>
-<BR>
5887<BR>
5891<BR>
5880<BR>
-<BR>
-<BR>
-<BR>
T93Z<BR>
T93YA<BR>
T93XA<BR>
T93YB<BR>
T93XB<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
8026EKP<BR>
8026EKW<BR>
8026EKM<BR>
8026EKP<BR>
8026EKB<BR>
8026EKM<BR>
1309X<BR>
1309P<BR>
1309W<BR>
8024EKP<BR>
8024EKW<BR>
8024EKN<BR>
RJ-9P/CT9P<BR>
RJ-9W<BR>
RJ-9X<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
3103P<BR>
3103Y<BR>
3103Z<BR>
3103P<BR>
3103Y<BR>
3103Z<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
3105P/3106P<BR>
3105W/3106W<BR>
3105X/3106X<BR>
3105Y/3106Y<BR>
3105Z/3105Z<BR>
3102P<BR>
3102W<BR>
3102X<BR>
3102Y<BR>
3102Z<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
EVMCBG<BR>
EVMCCG<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
55-1-X<BR>
55-4-X<BR>
55-3-X<BR>
55-2-X<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
50-2-X<BR>
50-4-X<BR>
50-3-X<BR>
-<BR>
-<BR>
-<BR>
64P<BR>
64W<BR>
64X<BR>
64Y<BR>
64Z<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
RT/RTR22<BR>
RT/RTR22<BR>
RT/RTR22<BR>
RT/RTR22<BR>
RJ/RJR22<BR>
RJ/RJR22<BR>
RJ/RJR22<BR>
RT/RTR26<BR>
RT/RTR26<BR>
RT/RTR26<BR>
RJ/RJR26<BR>
RJ/RJR26<BR>
RJ/RJR26<BR>
RJ/RJR26<BR>
RJ/RJR26<BR>
RJ/RJR26<BR>
RT/RTR24<BR>
RT/RTR24<BR>
RT/RTR24<BR>
RJ/RJR24<BR>
RJ/RJR24<BR>
RJ/RJR24<BR>
RJ/RJR24<BR>
RJ/RJR24<BR>
RJ/RJR24<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
</TR>
<TR>
<TD COLSPAN=8>
</TD>
</TR>
<TR>
<TD COLSPAN=8>
<FONT SIZE=4 FACE=ARIAL><B>SINGLE TURN</B></FONT>
</TD>
</TR>
<TR>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>BOURN</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>BI TECH</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>DALE-VISHAY</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>PHILIPS/MEPCO</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>MURATA</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>PANASONIC</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>SPECTROL</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>MILSPEC</B></FONT>
</TD>
</TR>
<TR>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
3323P<BR>
3323S<BR>
3323W<BR>
3329H<BR>
3329P<BR>
3329W<BR>
3339H<BR>
3339P<BR>
3339W<BR>
3352E<BR>
3352H<BR>
3352K<BR>
3352P<BR>
3352T<BR>
3352V<BR>
3352W<BR>
3362H<BR>
3362M<BR>
3362P<BR>
3362R<BR>
3362S<BR>
3362U<BR>
3362W<BR>
3362X<BR>
3386B<BR>
3386C<BR>
3386F<BR>
3386H<BR>
3386K<BR>
3386M<BR>
3386P<BR>
3386S<BR>
3386W<BR>
3386X<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
25P<BR>
25S<BR>
25RX<BR>
82P<BR>
82M<BR>
82PA<BR>
-<BR>
-<BR>
-<BR>
91E<BR>
91X<BR>
91T<BR>
91B<BR>
91A<BR>
91V<BR>
91W<BR>
25W<BR>
25V<BR>
25P<BR>
-<BR>
25S<BR>
25U<BR>
25RX<BR>
25X<BR>
72XW<BR>
72XL<BR>
72PM<BR>
72RX<BR>
-<BR>
72PX<BR>
72P<BR>
72RXW<BR>
72RXL<BR>
72X<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
T7YB<BR>
T7YA<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
TXD<BR>
TYA<BR>
TYP<BR>
-<BR>
TYD<BR>
TX<BR>
-<BR>
150SX<BR>
100SX<BR>
102T<BR>
101S<BR>
190T<BR>
150TX<BR>
101<BR>
-<BR>
-<BR>
101SX<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
ET6P<BR>
ET6S<BR>
ET6X<BR>
RJ-6W/8014EMW<BR>
RJ-6P/8014EMP<BR>
RJ-6X/8014EMX<BR>
TM7W<BR>
TM7P<BR>
TM7X<BR>
-<BR>
8017SMS<BR>
-<BR>
8017SMB<BR>
8017SMA<BR>
-<BR>
-<BR>
CT-6W<BR>
CT-6H<BR>
CT-6P<BR>
CT-6R<BR>
-<BR>
CT-6V<BR>
CT-6X<BR>
-<BR>
-<BR>
8038EKV<BR>
-<BR>
8038EKX<BR>
-<BR>
-<BR>
8038EKP<BR>
8038EKZ<BR>
8038EKW<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
3321H<BR>
3321P<BR>
3321N<BR>
1102H<BR>
1102P<BR>
1102T<BR>
RVA0911V304A<BR>
-<BR>
RVA0911H413A<BR>
RVG0707V100A<BR>
RVA0607V(H)306A<BR>
RVA1214H213A<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
3104B<BR>
3104C<BR>
3104F<BR>
3104H<BR>
-<BR>
3104M<BR>
3104P<BR>
3104S<BR>
3104W<BR>
3104X<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
EVMQ0G<BR>
EVMQIG<BR>
EVMQ3G<BR>
EVMS0G<BR>
EVMQ0G<BR>
EVMG0G<BR>
-<BR>
-<BR>
-<BR>
EVMK4GA00B<BR>
EVM30GA00B<BR>
EVMK0GA00B<BR>
EVM38GA00B<BR>
EVMB6<BR>
EVLQ0<BR>
-<BR>
EVMMSG<BR>
EVMMBG<BR>
EVMMAG<BR>
-<BR>
-<BR>
EVMMCS<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
EVMM1<BR>
-<BR>
-<BR>
EVMM0<BR>
-<BR>
-<BR>
EVMM3<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
62-3-1<BR>
62-1-2<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
67R<BR>
-<BR>
67P<BR>
-<BR>
-<BR>
-<BR>
-<BR>
67X<BR>
63V<BR>
63S<BR>
63M<BR>
-<BR>
-<BR>
63H<BR>
63P<BR>
-<BR>
-<BR>
63X<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
RJ/RJR50<BR>
RJ/RJR50<BR>
RJ/RJR50<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
</TR>
</TABLE>
<P> <P>
<TABLE BORDER=0 CELLSPACING=1 CELLPADDING=3>
<TR>
<TD COLSPAN=7>
<FONT color="#0000FF" SIZE=4 FACE=ARIAL><B>SMD TRIM-POT CROSS REFERENCE</B></FONT>
<P>
<FONT SIZE=4 FACE=ARIAL><B>MULTI-TURN</B></FONT>
</TD>
</TR>
<TR>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>BOURNS</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>BI TECH</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>DALE-VISHAY</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>PHILIPS/MEPCO</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>PANASONIC</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>TOCOS</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>AUX/KYOCERA</B></FONT>
</TD>
</TR>
<TR>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
3224G<BR>
3224J<BR>
3224W<BR>
3269P<BR>
3269W<BR>
3269X<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
44G<BR>
44J<BR>
44W<BR>
84P<BR>
84W<BR>
84X<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
ST63Z<BR>
ST63Y<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
ST5P<BR>
ST5W<BR>
ST5X<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
</TR>
<TR>
<TD COLSPAN=7>
</TD>
</TR>
<TR>
<TD COLSPAN=7>
<FONT SIZE=4 FACE=ARIAL><B>SINGLE TURN</B></FONT>
</TD>
</TR>
<TR>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>BOURNS</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>BI TECH</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>DALE-VISHAY</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>PHILIPS/MEPCO</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>PANASONIC</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>TOCOS</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>AUX/KYOCERA</B></FONT>
</TD>
</TR>
<TR>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
3314G<BR>
3314J<BR>
3364A/B<BR>
3364C/D<BR>
3364W/X<BR>
3313G<BR>
3313J<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
23B<BR>
23A<BR>
21X<BR>
21W<BR>
-<BR>
22B<BR>
22A<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
ST5YL/ST53YL<BR>
ST5YJ/5T53YJ<BR>
ST-23A<BR>
ST-22B<BR>
ST-22<BR>
-<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
ST-4B<BR>
ST-4A<BR>
-<BR>
-<BR>
-<BR>
ST-3B<BR>
ST-3A<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
EVM-6YS<BR>
EVM-1E<BR>
EVM-1G<BR>
EVM-1D<BR>
-<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
G4B<BR>
G4A<BR>
TR04-3S1<BR>
TRG04-2S1<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
DVR-43A<BR>
CVR-42C<BR>
CVR-42A/C<BR>
-<BR>
-<BR></FONT>
</TD>
</TR>
</TABLE>
<P>
<FONT SIZE=4 FACE=ARIAL><B>ALT = ALTERNATE</B></FONT>
<P>
<P>
</td>
</tr>
</table>
<b>Chip RESISTOR 0402 EIA (1005 Metric)</b>
>NAME
>VALUE
<b>RESISTOR</b>
>NAME
>VALUE
<b>RESISTOR</b><p>
>NAME
>VALUE
<b>RESISTOR</b> wave soldering<p>
>NAME
>VALUE
<b>RESISTOR</b>
>NAME
>VALUE
<b>RESISTOR</b><p>
wave soldering
>NAME
>VALUE
<b>RESISTOR</b>
>NAME
>VALUE
<b>RESISTOR</b><p>
wave soldering
>NAME
>VALUE
<b>RESISTOR</b>
>NAME
>VALUE
<b>RESISTOR</b><p>
wave soldering
>NAME
>VALUE
<b>RESISTOR</b>
>NAME
>VALUE
<b>RESISTOR</b><p>
wave soldering
>NAME
>VALUE
<b>RESISTOR</b>
>NAME
>VALUE
<b>RESISTOR</b><p>
wave soldering
>NAME
>VALUE
<b>RESISTOR</b>
>NAME
>VALUE
<b>RESISTOR</b><p>
wave soldering
>NAME
>VALUE
<b>RESISTOR</b>
>NAME
>VALUE
<b>RESISTOR</b><p>
wave soldering
>NAME
>VALUE
<b>RESISTOR</b>
>NAME
>VALUE
<b>RESISTOR</b><p>
wave soldering
>NAME
>VALUE
<b>RESISTOR</b><p>
Source: http://download.siliconexpert.com/pdfs/2005/02/24/Semi_Ap/2/VSH/Resistor/dcrcwfre.pdf
>NAME
>VALUE
<b>RESISTOR</b> wave soldering<p>
Source: http://download.siliconexpert.com/pdfs/2005/02/24/Semi_Ap/2/VSH/Resistor/dcrcwfre.pdf
>NAME
>VALUE
<b>RESISTOR</b><p>
MELF 0.10 W
>NAME
>VALUE
<b>RESISTOR</b><p>
MELF 0.25 W
>NAME
>VALUE
<b>RESISTOR</b><p>
MELF 0.12 W
>NAME
>VALUE
<b>RESISTOR</b><p>
MELF 0.10 W
>NAME
>VALUE
<b>RESISTOR</b><p>
MELF 0.25 W
>NAME
>VALUE
<b>RESISTOR</b><p>
MELF 0.25 W
>NAME
>VALUE
<b>RESISTOR</b><p>
MELF 0.12 W
>NAME
>VALUE
<b>RESISTOR</b><p>
MELF 0.25 W
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0204, grid 5 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0204, grid 7.5 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0204, grid 2.5 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0207, grid 10 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0207, grid 12 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0207, grid 15mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0207, grid 2.5 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0207, grid 5 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0207, grid 7.5 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0309, grid 10mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0309, grid 12.5 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0309, grid 2.5 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0411, grid 12.5 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0411, grid 15 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0411, grid 3.81 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0414, grid 15 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0414, grid 5 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0617, grid 17.5 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0617, grid 22.5 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0617, grid 5 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0922, grid 22.5 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0613, grid 5 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0613, grid 15 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0817, grid 22.5 mm
>NAME
>VALUE
0817
<b>RESISTOR</b><p>
type 0817, grid 6.35 mm
>NAME
>VALUE
0817
<b>RESISTOR</b><p>
type V234, grid 12.5 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type V235, grid 17.78 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type V526-0, grid 2.5 mm
>NAME
>VALUE
<b>CECC Size RC2211</b> Reflow Soldering<p>
source Beyschlag
>NAME
>VALUE
<b>CECC Size RC2211</b> Wave Soldering<p>
source Beyschlag
>NAME
>VALUE
<b>CECC Size RC3715</b> Reflow Soldering<p>
source Beyschlag
>NAME
>VALUE
<b>CECC Size RC3715</b> Wave Soldering<p>
source Beyschlag
>NAME
>VALUE
<b>CECC Size RC6123</b> Reflow Soldering<p>
source Beyschlag
>NAME
>VALUE
<b>CECC Size RC6123</b> Wave Soldering<p>
source Beyschlag
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0922, grid 7.5 mm
>NAME
>VALUE
0922
<b>RESISTOR</b><p>
type RDH, grid 15 mm
>NAME
>VALUE
RDH
<b>Mini MELF 0102 Axial</b>
>NAME
>VALUE
<b>RESISTOR</b> chip<p>
Source: http://www.vishay.com/docs/20008/dcrcw.pdf
>NAME
>VALUE
<b>Bulk Metal® Foil Technology</b>, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements<p>
MIL SIZE RBR52<br>
Source: VISHAY .. vta56.pdf
>NAME
>VALUE
<b>Bulk Metal® Foil Technology</b>, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements<p>
MIL SIZE RBR53<br>
Source: VISHAY .. vta56.pdf
>NAME
>VALUE
<b>Bulk Metal® Foil Technology</b>, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements<p>
MIL SIZE RBR54<br>
Source: VISHAY .. vta56.pdf
>NAME
>VALUE
<b>Bulk Metal® Foil Technology</b>, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements<p>
MIL SIZE RBR55<br>
Source: VISHAY .. vta56.pdf
>NAME
>VALUE
<b>Bulk Metal® Foil Technology</b>, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements<p>
MIL SIZE RBR56<br>
Source: VISHAY .. vta56.pdf
>NAME
>VALUE
<b>Bulk Metal® Foil Technology</b>, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements<p>
MIL SIZE RNC55<br>
Source: VISHAY .. vta56.pdf
>NAME
>VALUE
<b>Bulk Metal® Foil Technology</b>, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements<p>
MIL SIZE RNC60<br>
Source: VISHAY .. vta56.pdf
>NAME
>VALUE
<b>Package 4527</b><p>
Source: http://www.vishay.com/docs/31059/wsrhigh.pdf
>NAME
>VALUE
<b>Wirewound Resistors, Precision Power</b><p>
Source: VISHAY wscwsn.pdf
>NAME
>VALUE
<b>Wirewound Resistors, Precision Power</b><p>
Source: VISHAY wscwsn.pdf
>NAME
>VALUE
<b>Wirewound Resistors, Precision Power</b><p>
Source: VISHAY wscwsn.pdf
>NAME
>VALUE
<b>Wirewound Resistors, Precision Power</b><p>
Source: VISHAY wscwsn.pdf
>NAME
>VALUE
<b>Wirewound Resistors, Precision Power</b><p>
Source: VISHAY wscwsn.pdf
>NAME
>VALUE
<b>Wirewound Resistors, Precision Power</b><p>
Source: VISHAY wscwsn.pdf
>NAME
>VALUE
<b>CRCW1218 Thick Film, Rectangular Chip Resistors</b><p>
Source: http://www.vishay.com .. dcrcw.pdf
>NAME
>VALUE
<b>Chip Monolithic Ceramic Capacitors</b> Medium Voltage High Capacitance for General Use<p>
Source: http://www.murata.com .. GRM43DR72E224KW01.pdf
>NAME
>VALUE
<b>PRL1632 are realized as 1W for 3.2 × 1.6mm(1206)</b><p>
Source: http://www.mouser.com/ds/2/392/products_18-2245.pdf
>NAME
>VALUE
>NAME
>VALUE
<b>CAPACITOR</b>
>NAME
>VALUE
<b>CAPACITOR</b>
>NAME
>VALUE
<b>CAPACITOR</b>
>NAME
>VALUE
<b>CAPACITOR</b><p>
>NAME
>VALUE
<b>CAPACITOR</b>
>NAME
>VALUE
<b>CAPACITOR</b>
>NAME
>VALUE
<b>CAPACITOR</b>
>NAME
>VALUE
<b>CAPACITOR</b>
>NAME
>VALUE
<b>CAPACITOR</b>
>NAME
>VALUE
<b>CAPACITOR</b>
>NAME
>VALUE
<b>CAPACITOR</b>
>NAME
>VALUE
<b>CAPACITOR</b>
>NAME
>VALUE
<b>CAPACITOR</b>
>NAME
>VALUE
<b>CAPACITOR</b>
>NAME
>VALUE
<b>CAPACITOR</b>
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 2.5 mm, outline 2.4 x 4.4 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 2.5 mm, outline 2.5 x 5 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 2.5 mm, outline 3 x 5 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 2.5 mm, outline 4 x 5 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 2.5 mm, outline 5 x 5 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 2.5 mm, outline 6 x 5 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 2.5 mm + 5 mm, outline 2.4 x 7 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 2.5 + 5 mm, outline 2.5 x 7.5 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 2.5 + 5 mm, outline 3.5 x 7.5 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 2.5 + 5 mm, outline 4.5 x 7.5 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 2.5 + 5 mm, outline 5.5 x 7.5 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 5 mm, outline 2.4 x 4.4 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 5 mm, outline 2.5 x 7.5 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 5 mm, outline 4.5 x 7.5 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 5 mm, outline 3 x 7.5 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 5 mm, outline 5 x 7.5 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 5 mm, outline 5.5 x 7.5 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 5 mm, outline 7.5 x 7.5 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
Horizontal, grid 5 mm, outline 7.5 x 7.5 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 7.5 mm, outline 3.2 x 10.3 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 7.5 mm, outline 4.2 x 10.3 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 7.5 mm, outline 5.2 x 10.6 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 10.2 mm, outline 4.3 x 13.3 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 10.2 mm, outline 5.4 x 13.3 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 10.2 mm, outline 6.4 x 13.3 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 10.2 mm + 15.2 mm, outline 6.2 x 18.4 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 15 mm, outline 5.4 x 18.3 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 15 mm, outline 6.4 x 18.3 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 15 mm, outline 7.2 x 18.3 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 15 mm, outline 8.4 x 18.3 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 15 mm, outline 9.1 x 18.2 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 22.5 mm, outline 6.2 x 26.8 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 22.5 mm, outline 7.4 x 26.8 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 22.5 mm, outline 8.7 x 26.8 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 22.5 mm, outline 10.8 x 26.8 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 22.5 mm, outline 11.3 x 26.8 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 27.5 mm, outline 9.3 x 31.6 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 27.5 mm, outline 11.3 x 31.6 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 27.5 mm, outline 13.4 x 31.6 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 27.5 mm, outline 20.5 x 31.6 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 32.5 mm, outline 13.7 x 37.4 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 32.5 mm, outline 16.2 x 37.4 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 32.5 mm, outline 18.2 x 37.4 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 37.5 mm, outline 19.2 x 41.8 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 37.5 mm, outline 20.3 x 41.8 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 5 mm, outline 3.5 x 7.5 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 37.5 mm, outline 15.5 x 41.8 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 7.5 mm, outline 6.3 x 10.6 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 27.5 mm, outline 15.4 x 31.6 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 27.5 mm, outline 17.3 x 31.6 mm
>NAME
>VALUE
<b>Ceramic Chip Capacitor KEMET 0204 reflow solder</b><p>
Metric Code Size 1005
>NAME
>VALUE
<b>Ceramic Chip Capacitor KEMET 0603 reflow solder</b><p>
Metric Code Size 1608
>NAME
>VALUE
<b>Ceramic Chip Capacitor KEMET 0805 reflow solder</b><p>
Metric Code Size 2012
>NAME
>VALUE
<b>Ceramic Chip Capacitor KEMET 1206 reflow solder</b><p>
Metric Code Size 3216
>NAME
>VALUE
<b>Ceramic Chip Capacitor KEMET 1210 reflow solder</b><p>
Metric Code Size 3225
>NAME
>VALUE
<b>Ceramic Chip Capacitor KEMET 1812 reflow solder</b><p>
Metric Code Size 4532
>NAME
>VALUE
<b>Ceramic Chip Capacitor KEMET 1825 reflow solder</b><p>
Metric Code Size 4564
>NAME
>VALUE
<b>Ceramic Chip Capacitor KEMET 2220 reflow solder</b><p>Metric Code Size 5650
>NAME
>VALUE
<b>Ceramic Chip Capacitor KEMET 2225 reflow solder</b><p>Metric Code Size 5664
>NAME
>VALUE
<b> </b><p>
Source: http://www.vishay.com/docs/10129/hpc0201a.pdf
>NAME
>VALUE
Source: http://www.avxcorp.com/docs/catalogs/cx5r.pdf
>NAME
>VALUE
<b>CAPACITOR</b><p>
Source: AVX .. aphvc.pdf
>NAME
>VALUE
<b>CAPACITOR</b><p>
Source: AVX .. aphvc.pdf
>NAME
>VALUE
<b>CAPACITOR</b>
>NAME
>VALUE
Chip RESISTOR 0402 EIA (1005 Metric)
RESISTOR
RESISTOR
RESISTOR wave soldering
RESISTOR
RESISTOR
wave soldering
RESISTOR
RESISTOR
wave soldering
RESISTOR
RESISTOR
wave soldering
RESISTOR
RESISTOR
wave soldering
RESISTOR
RESISTOR
wave soldering
RESISTOR
RESISTOR
wave soldering
RESISTOR
RESISTOR
wave soldering
RESISTOR
RESISTOR
wave soldering
RESISTOR
Source: http://download.siliconexpert.com/pdfs/2005/02/24/Semi_Ap/2/VSH/Resistor/dcrcwfre.pdf
RESISTOR wave soldering
Source: http://download.siliconexpert.com/pdfs/2005/02/24/Semi_Ap/2/VSH/Resistor/dcrcwfre.pdf
RESISTOR
MELF 0.10 W
RESISTOR
MELF 0.25 W
RESISTOR
MELF 0.12 W
RESISTOR
MELF 0.10 W
RESISTOR
MELF 0.25 W
RESISTOR
MELF 0.25 W
RESISTOR
MELF 0.12 W
RESISTOR
MELF 0.25 W
RESISTOR
type 0204, grid 5 mm
RESISTOR
type 0204, grid 7.5 mm
RESISTOR
type 0204, grid 2.5 mm
RESISTOR
type 0207, grid 10 mm
RESISTOR
type 0207, grid 12 mm
RESISTOR
type 0207, grid 15mm
RESISTOR
type 0207, grid 2.5 mm
RESISTOR
type 0207, grid 5 mm
RESISTOR
type 0207, grid 7.5 mm
RESISTOR
type 0309, grid 10mm
RESISTOR
type 0309, grid 12.5 mm
RESISTOR
type 0309, grid 2.5 mm
RESISTOR
type 0411, grid 12.5 mm
RESISTOR
type 0411, grid 15 mm
RESISTOR
type 0411, grid 3.81 mm
RESISTOR
type 0414, grid 15 mm
RESISTOR
type 0414, grid 5 mm
RESISTOR
type 0617, grid 17.5 mm
RESISTOR
type 0617, grid 22.5 mm
RESISTOR
type 0617, grid 5 mm
RESISTOR
type 0922, grid 22.5 mm
RESISTOR
type 0613, grid 5 mm
RESISTOR
type 0613, grid 15 mm
RESISTOR
type 0817, grid 22.5 mm
RESISTOR
type 0817, grid 6.35 mm
RESISTOR
type V234, grid 12.5 mm
RESISTOR
type V235, grid 17.78 mm
RESISTOR
type V526-0, grid 2.5 mm
CECC Size RC2211 Reflow Soldering
source Beyschlag
CECC Size RC2211 Wave Soldering
source Beyschlag
CECC Size RC3715 Reflow Soldering
source Beyschlag
CECC Size RC3715 Wave Soldering
source Beyschlag
CECC Size RC6123 Reflow Soldering
source Beyschlag
CECC Size RC6123 Wave Soldering
source Beyschlag
RESISTOR
type 0922, grid 7.5 mm
RESISTOR
type RDH, grid 15 mm
Mini MELF 0102 Axial
RESISTOR chip
Source: http://www.vishay.com/docs/20008/dcrcw.pdf
Bulk Metal® Foil Technology, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements
MIL SIZE RBR52
Source: VISHAY .. vta56.pdf
Bulk Metal® Foil Technology, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements
MIL SIZE RBR53
Source: VISHAY .. vta56.pdf
Bulk Metal® Foil Technology, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements
MIL SIZE RBR54
Source: VISHAY .. vta56.pdf
Bulk Metal® Foil Technology, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements
MIL SIZE RBR55
Source: VISHAY .. vta56.pdf
Bulk Metal® Foil Technology, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements
MIL SIZE RBR56
Source: VISHAY .. vta56.pdf
Bulk Metal® Foil Technology, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements
MIL SIZE RNC55
Source: VISHAY .. vta56.pdf
Bulk Metal® Foil Technology, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements
MIL SIZE RNC60
Source: VISHAY .. vta56.pdf
Package 4527
Source: http://www.vishay.com/docs/31059/wsrhigh.pdf
Wirewound Resistors, Precision Power
Source: VISHAY wscwsn.pdf
Wirewound Resistors, Precision Power
Source: VISHAY wscwsn.pdf
Wirewound Resistors, Precision Power
Source: VISHAY wscwsn.pdf
Wirewound Resistors, Precision Power
Source: VISHAY wscwsn.pdf
Wirewound Resistors, Precision Power
Source: VISHAY wscwsn.pdf
Wirewound Resistors, Precision Power
Source: VISHAY wscwsn.pdf
CRCW1218 Thick Film, Rectangular Chip Resistors
Source: http://www.vishay.com .. dcrcw.pdf
Chip Monolithic Ceramic Capacitors Medium Voltage High Capacitance for General Use
Source: http://www.murata.com .. GRM43DR72E224KW01.pdf
PRL1632 are realized as 1W for 3.2 × 1.6mm(1206)
Source: http://www.mouser.com/ds/2/392/products_18-2245.pdf
Chip, 0.40 X 0.20 X 0.16 mm body
<p>Chip package with body size 0.40 X 0.20 X 0.16 mm</p>
Chip, 1.00 X 0.50 X 0.60 mm body
<p>Chip package with body size 1.00 X 0.50 X 0.60 mm</p>
CAPACITOR
CAPACITOR
CAPACITOR
CAPACITOR
CAPACITOR
CAPACITOR
CAPACITOR
CAPACITOR
CAPACITOR
CAPACITOR
CAPACITOR
CAPACITOR
CAPACITOR
CAPACITOR
CAPACITOR
grid 2.5 mm, outline 2.4 x 4.4 mm
CAPACITOR
grid 2.5 mm, outline 2.5 x 5 mm
CAPACITOR
grid 2.5 mm, outline 3 x 5 mm
CAPACITOR
grid 2.5 mm, outline 4 x 5 mm
CAPACITOR
grid 2.5 mm, outline 5 x 5 mm
CAPACITOR
grid 2.5 mm, outline 6 x 5 mm
CAPACITOR
grid 2.5 mm + 5 mm, outline 2.4 x 7 mm
CAPACITOR
grid 2.5 + 5 mm, outline 2.5 x 7.5 mm
CAPACITOR
grid 2.5 + 5 mm, outline 3.5 x 7.5 mm
CAPACITOR
grid 2.5 + 5 mm, outline 4.5 x 7.5 mm
CAPACITOR
grid 2.5 + 5 mm, outline 5.5 x 7.5 mm
CAPACITOR
grid 5 mm, outline 2.4 x 4.4 mm
CAPACITOR
grid 5 mm, outline 2.5 x 7.5 mm
CAPACITOR
grid 5 mm, outline 4.5 x 7.5 mm
CAPACITOR
grid 5 mm, outline 3 x 7.5 mm
CAPACITOR
grid 5 mm, outline 5 x 7.5 mm
CAPACITOR
grid 5 mm, outline 5.5 x 7.5 mm
CAPACITOR
grid 5 mm, outline 7.5 x 7.5 mm
CAPACITOR
Horizontal, grid 5 mm, outline 7.5 x 7.5 mm
CAPACITOR
grid 7.5 mm, outline 3.2 x 10.3 mm
CAPACITOR
grid 7.5 mm, outline 4.2 x 10.3 mm
CAPACITOR
grid 7.5 mm, outline 5.2 x 10.6 mm
CAPACITOR
grid 10.2 mm, outline 4.3 x 13.3 mm
CAPACITOR
grid 10.2 mm, outline 5.4 x 13.3 mm
CAPACITOR
grid 10.2 mm, outline 6.4 x 13.3 mm
CAPACITOR
grid 10.2 mm + 15.2 mm, outline 6.2 x 18.4 mm
CAPACITOR
grid 15 mm, outline 5.4 x 18.3 mm
CAPACITOR
grid 15 mm, outline 6.4 x 18.3 mm
CAPACITOR
grid 15 mm, outline 7.2 x 18.3 mm
CAPACITOR
grid 15 mm, outline 8.4 x 18.3 mm
CAPACITOR
grid 15 mm, outline 9.1 x 18.2 mm
CAPACITOR
grid 22.5 mm, outline 6.2 x 26.8 mm
CAPACITOR
grid 22.5 mm, outline 7.4 x 26.8 mm
CAPACITOR
grid 22.5 mm, outline 8.7 x 26.8 mm
CAPACITOR
grid 22.5 mm, outline 10.8 x 26.8 mm
CAPACITOR
grid 22.5 mm, outline 11.3 x 26.8 mm
CAPACITOR
grid 27.5 mm, outline 9.3 x 31.6 mm
CAPACITOR
grid 27.5 mm, outline 11.3 x 31.6 mm
CAPACITOR
grid 27.5 mm, outline 13.4 x 31.6 mm
CAPACITOR
grid 27.5 mm, outline 20.5 x 31.6 mm
CAPACITOR
grid 32.5 mm, outline 13.7 x 37.4 mm
CAPACITOR
grid 32.5 mm, outline 16.2 x 37.4 mm
CAPACITOR
grid 32.5 mm, outline 18.2 x 37.4 mm
CAPACITOR
grid 37.5 mm, outline 19.2 x 41.8 mm
CAPACITOR
grid 37.5 mm, outline 20.3 x 41.8 mm
CAPACITOR
grid 5 mm, outline 3.5 x 7.5 mm
CAPACITOR
grid 37.5 mm, outline 15.5 x 41.8 mm
CAPACITOR
grid 7.5 mm, outline 6.3 x 10.6 mm
CAPACITOR
grid 27.5 mm, outline 15.4 x 31.6 mm
CAPACITOR
grid 27.5 mm, outline 17.3 x 31.6 mm
Ceramic Chip Capacitor KEMET 0204 reflow solder
Metric Code Size 1005
Ceramic Chip Capacitor KEMET 0603 reflow solder
Metric Code Size 1608
Ceramic Chip Capacitor KEMET 0805 reflow solder
Metric Code Size 2012
Ceramic Chip Capacitor KEMET 1206 reflow solder
Metric Code Size 3216
Ceramic Chip Capacitor KEMET 1210 reflow solder
Metric Code Size 3225
Ceramic Chip Capacitor KEMET 1812 reflow solder
Metric Code Size 4532
Ceramic Chip Capacitor KEMET 1825 reflow solder
Metric Code Size 4564
Ceramic Chip Capacitor KEMET 2220 reflow solderMetric Code Size 5650
Ceramic Chip Capacitor KEMET 2225 reflow solderMetric Code Size 5664
Source: http://www.vishay.com/docs/10129/hpc0201a.pdf
Source: http://www.avxcorp.com/docs/catalogs/cx5r.pdf
CAPACITOR
Source: AVX .. aphvc.pdf
CAPACITOR
Source: AVX .. aphvc.pdf
CAPACITOR
>NAME
>VALUE
>NAME
>VALUE
<B>RESISTOR</B>, European symbol
<B>CAPACITOR</B>, European symbol
<h3>SparkFun Electronics' preferred foot prints</h3>
We've spent an enormous amount of time creating and checking these footprints and parts. If you enjoy using this library, please buy one of our products at www.sparkfun.com.
<br><br>
<b>Licensing:</b> CC v3.0 Share-Alike You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.
>VALUE
>VALUE
<b>SUPPLY SYMBOL</b>
<b>SUPPLY SYMBOL</b>
PCB EDGE
>NAME
>VALUE
>NAME
>VALUE
USB-C (USB TYPE-C) USB 3.1 (USB 3.1 Gen 2, Superspeed+) Receptacle Connector 24 (16+8 Dummy) Position Board Edge, Cutout; Surface Mount; Through Hole, Right Angle <a href="https://pricing.snapeda.com/parts/CX90M-16P/Hirose%20Electric%20Co%20Ltd/view-part?ref=eda">Check prices</a>
<b>Texas Instruments LM1117 Voltage Regulators</b><br>
<br>
(c) 2014 Samuel Lourenço
<b>SOT-223 Plastic Small Outline (MP)</b><br>
<br>
Source: <a href="http://www.ti.com/lit/ds/symlink/lm1117-n.pdf">http://www.ti.com/lit/ds/symlink/lm1117-n.pdf</a>
3
4
1
2
>NAME
>VALUE
<b>TO-220 Plastic Through-hole (T)</b> - Horizontal mounting<br>
<br>
Source: <a href="http://www.ti.com/lit/ds/symlink/lm1117-n.pdf">http://www.ti.com/lit/ds/symlink/lm1117-n.pdf</a>
>NAME
>VALUE
<b>TO-220 Plastic Through-hole (T)</b> - Vertical mounting<br>
<br>
Source: <a href="http://www.ti.com/lit/ds/symlink/lm1117-n.pdf">http://www.ti.com/lit/ds/symlink/lm1117-n.pdf</a>
>NAME
>VALUE
1
2
3
<b>TO-252 Plastic Surface Mount (DT)</b> - Reference TD03B<br>
<br>
Source: <a href="http://www.ti.com/lit/ds/symlink/lm1117-n.pdf">http://www.ti.com/lit/ds/symlink/lm1117-n.pdf</a>
>NAME
>VALUE
<b>TO-263-3 Plastic Surface Mount (S)</b> - 3-Lead Package<br>
<br>
Source: <a href="http://www.ti.com/lit/ds/symlink/lm1117-n.pdf">http://www.ti.com/lit/ds/symlink/lm1117-n.pdf</a>
>NAME
>VALUE
<b>8-Lead Very Very Thin Small Outline, No Lead Package (LD)</b> - 4x4 mm Body [WSON]<br>
<br>
Source: <a href="http://www.ti.com/lit/ds/symlink/lm1117-n.pdf">http://www.ti.com/lit/ds/symlink/lm1117-n.pdf</a>
>NAME
>VALUE
>NAME
>VALUE
GND
IN
OUT
<b>800mA Low-Dropout Linear Regulator</b><br>
<br>
Source: <a href="http://ww1.microchip.com/downloads/en/DeviceDoc/39760d.pdf">http://ww1.microchip.com/downloads/en/DeviceDoc/39760d.pdf</a>
<h3>SparkFun Connectors</h3>
This library contains electrically-functional connectors.
<br>
<br>
We've spent an enormous amount of time creating and checking these footprints and parts, but it is <b> the end user's responsibility</b> to ensure correctness and suitablity for a given componet or application.
<br>
<br>If you enjoy using this library, please buy one of our products at <a href=" www.sparkfun.com">SparkFun.com</a>.
<br>
<br>
<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/
<br>
<br>
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.
<h3>Plated Through Hole - 6 Pin</h3>
<p>Specifications:
<ul><li>Pin count:6</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_06</li>
</ul></p>
>NAME
>VALUE
<h3>Molex 6-Pin Plated Through-Hole</h3>
<p>Specifications:
<ul><li>Pin count:6</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/2pin_molex_set_19iv10.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_06</li>
</ul></p>
>NAME
>VALUE
<h3>Molex 6-Pin Plated Through-Hole Right Angle</h3>
tPlace shows angle of connector.
<p>Specifications:
<ul><li>Pin count:6</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/2pin_molex_set_19iv10.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_06</li>
</ul></p>
>NAME
>VALUE
<h3>SMD - 6 Pin Right Angle Male Header</h3>
tDocu layer shows pin locations.
<p>Specifications:
<ul><li>Pin count:6</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_06</li>
</ul></p>
>NAME
>VALUE
<h3>Plated Through Hole - 6 Pin with Locking Footprint</h3>
Holes are offset 0.005" from center, locking pins in place during soldering.
<p>Specifications:
<ul><li>Pin count:6</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_06</li>
</ul></p>
>NAME
>VALUE
<h3>Plated Through Hole - 6 Pin with Locking Footprint with Long Pads</h3>
Holes are offset 0.005" from center, locking pins in place during soldering.
<p>Specifications:
<ul><li>Pin count:6</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_06</li>
</ul></p>
>NAME
>VALUE
<h3>Molex 6-Pin Plated Through-Hole Locking Footprint</h3>
Holes are offset 0.005" from center to hold pins in place during soldering.
<p>Specifications:
<ul><li>Pin count:6</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/2pin_molex_set_19iv10.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_06</li>
</ul></p>
>NAME
>VALUE
<h3>Molex 6-Pin Plated Through-Hole Right Angle Locking Footprint</h3>
Holes are offset 0.005" from center to hold pins in place during soldering.
tPlace shows location of connector.
<p>Specifications:
<ul><li>Pin count:6</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/2pin_molex_set_19iv10.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_06</li>
</ul></p>
>NAME
>VALUE
<h3>Plated Through Hole - 6 Pin Locking Header</h3>
Includes silk outline for 6 pin female header
<p>Specifications:
<ul><li>Pin count:6</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p><a href=”https://cdn.sparkfun.com/datasheets/Prototyping/SP-140520-XX-001.pdf”>Datasheet referenced for footprint:</a></p>
<p>Example device(s):
<ul><li>CONN_06</li>
</ul></p>
>NAME
>VALUE
<h3>Plated Through Hole - 6 Pin with Long Pads</h3>
<p>Specifications:
<ul><li>Pin count:6</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_06</li>
</ul></p>
>NAME
>VALUE
<h3>Screw Terminal 3.5mm Pitch -6 Pin PTH</h3>
<p>Specifications:
<ul><li>Pin count: 6</li>
<li>Pin pitch: 3.5mm/138mil</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Screw-Terminal-3.5mm.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_06</li>
</ul></p>
>NAME
>VALUE
<h3>Header - 6 pin Female SMD</h3>
Right angle 0.1"
<p>Specifications:
<ul><li>Pin count:6</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p><a href=”http://cdn.sparkfun.com/datasheets/Prototyping/19686.pdf”>Datasheet referenced for footprint:</a></p>
<p>Example device(s):
<ul><li>CONN_06</li>
</ul></p>
>NAME
>VALUE
<h3> 6 Pin Holes</h3>
No silk, no plating
<p>Specifications:
<ul><li>Pin count:6</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_06</li>
</ul></p>
<h3> 6 Pin SMD Female Header</h3>
<p>Specifications:
<ul><li>Pin count:6</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p><a href=”http://cdn.sparkfun.com/datasheets/Prototyping/femaleSMDheader.pdf”>Datasheet referenced for footprint:</a></p>
<p>Example device(s):
<ul><li>CONN_06</li>
</ul></p>
>NAME
>VALUE
<h3> 6 Pin SMD Female Header</h3>
Alternate pin configuration
<p>Specifications:
<ul><li>Pin count:6</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p><a href=”http://cdn.sparkfun.com/datasheets/Prototyping/femaleSMDheader.pdf”>Datasheet referenced for footprint:</a></p>
<p>Example device(s):
<ul><li>CONN_06</li>
</ul></p>
>NAME
>VALUE
<h3> 6 Pin SMD Female Header - Combined Footprint</h3>
<p>Specifications:
<ul><li>Pin count:6</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p><a href=”http://cdn.sparkfun.com/datasheets/Prototyping/femaleSMDheader.pdf”>Datasheet referenced for footprint:</a></p>
<p>Example device(s):
<ul><li>CONN_06</li>
</ul></p>
>NAME
>VALUE
<h3> 6 Pin SMD Male Header</h3>
<p>Specifications:
<ul><li>Pin count:6</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p><a href=”http://cdn.sparkfun.com/datasheets/Prototyping/maleSMDheader.pdf”>Datasheet referenced for footprint:</a></p>
<p>Example device(s):
<ul><li>CONN_06</li>
</ul></p>
>NAME
>VALUE
<h3>JST SH Vertical 6-Pin Connector -SMD</h3>
<p>Specifications:
<ul><li>Pin count:6</li>
<li>Pin pitch:1mm</li>
<p><b><a href="https://www.sparkfun.com/datasheets/GPS/EM406-SMDConnector-eSH.pdf">Datasheet referenced for footprint</a></b></p>
</ul></p>
<p>Example device(s):
<ul><li>CONN_06</li>
<li>EM-406</li>
</ul></p>
>NAME
>VALUE
<h3>Plated Through Hole - 6 Pin No Silk Outline</h3>
<p>Specifications:
<ul><li>Pin count:6</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_06</li>
</ul></p>
>NAME
>VALUE
<h3>Plated Through Hole - 6 Pin</h3>
<p>Specifications:
<ul><li>Pin count:6</li>
<li>Pin pitch:1.27mm</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_06</li>
</ul></p>
>NAME
>VALUE
<h3>Plated Through Hole</h3>
<p>Specifications:
<ul><li>Pin count:2</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>
>NAME
>VALUE
<h3>Molex 2-Pin Plated Through-Hole</h3>
<p>Specifications:
<ul><li>Pin count:2</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/2pin_molex_set_19iv10.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>
>NAME
>VALUE
<h3>Screw Terminal 3.5mm Pitch - 2 Pin PTH</h3>
<p>Specifications:
<ul><li>Pin count: 2</li>
<li>Pin pitch: 3.5mm/138mil</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Screw-Terminal-3.5mm.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>
>NAME
>VALUE
<h3>JST-Right Angle Male Header SMT</h3>
<p>Specifications:
<ul><li>Pin count: 2</li>
<li>Pin pitch: 2mm</li>
</ul></p>
<p><a href=”http://www.4uconnector.com/online/object/4udrawing/20404.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_02</li>
<li>JST_2MM_MALE</li>
</ul></p>
>NAME
>VALUE
<h3>Plated Through Hole</h3>
<p>Specifications:
<ul><li>Pin count:2</li>
<li>Pin pitch:0.15"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>
>NAME
>VALUE
<h3>JST-Vertical Male Header SMT </h3>
<p>Specifications:
<ul><li>Pin count: 2</li>
<li>Pin pitch: 2mm</li>
</ul></p>
<p><a href=”http://www.4uconnector.com/online/object/4udrawing/20404.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>
>Name
>Value
<h3>Screw Terminal 5mm Pitch -2 Pin PTH</h3>
<p>Specifications:
<ul><li>Pin count: 2</li>
<li>Pin pitch: 5mm/197mil</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Screw-Terminal-5mm.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>
>NAME
>VALUE
<h3>Plated Through Hole - Locking Footprint</h3>
Holes are staggered by 0.005" from center to hold pins while soldering.
<p>Specifications:
<ul><li>Pin count:2</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>
>NAME
>VALUE
<h3>Molex 2-Pin Plated Through-Hole Locking Footprint</h3>
Holes are offset from center by 0.005" to hold pins in place during soldering.
<p>Specifications:
<ul><li>Pin count:2</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/2pin_molex_set_19iv10.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>
>NAME
>VALUE
<h3>Plated Through Hole - Long Pads with Locking Footprint</h3>
Pins are staggered by 0.005" from center to hold pins in place while soldering.
<p>Specifications:
<ul><li>Pin count:2</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>
>NAME
>VALUE
<h3>Screw Terminal 3.5mm Pitch - 2 Pin PTH Locking</h3>
Holes are offset from center 0.005" to hold pins in place during soldering.
<p>Specifications:
<ul><li>Pin count: 2</li>
<li>Pin pitch: 3.5mm/138mil</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Screw-Terminal-3.5mm.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>
>NAME
>VALUE
<h3>Plated Through Hole - Long Pads without Silk Outline</h3>
<p>Specifications:
<ul><li>Pin count:2</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>
>NAME
>VALUE
<h3>Plated Through Hole - No Silk Outline</h3>
<p>Specifications:
<ul><li>Pin count:2</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>
>NAME
>VALUE
<h3>JST 2 Pin Right Angle Plated Through Hole</h3>
tDocu indicate polarity for connections that match SparkFun LiPo battery terminations.
<p>Specifications:
<ul><li>Pin count: 2</li>
<li>Pin pitch:2mm</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Connectors/JST%282%29-01548.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>
>Name
>Value
+
-
<h3>Plated Through Hole - 0.1" holes</h3>
<p>Specifications:
<ul><li>Pin count:2</li>
<li>Pin pitch:0.2"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>
>NAME
>VALUE
<h3>Pogo Pins Connector - No Silk Outline</h3>
<p>Specifications:
<ul><li>Pin count:2</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>
>NAME
>VALUE
<h3>Screw Terminal 3.5mm Pitch - 2 Pin PTH No Silk Outline</h3>
<p>Specifications:
<ul><li>Pin count: 2</li>
<li>Pin pitch: 3.5mm/138mil</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Screw-Terminal-3.5mm.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>
>NAME
>VALUE
<h3>JST 2 Pin Right Angle Plated Through Hole- No Silk</h3>
tDocu indicate polarity for connections that match SparkFun LiPo battery terminations.
<br> No silk outline of connector.
<p>Specifications:
<ul><li>Pin count: 2</li>
<li>Pin pitch:2mm</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Connectors/JST%282%29-01548.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>
>Name
>Value
+
-
<h3>JST 2 Pin Right Angle Plated Through Hole - KIT</h3>
tDocu indicate polarity for connections that match SparkFun LiPo battery terminations.
<br> This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad.
<br> This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side.
<p>Specifications:
<ul><li>Pin count: 2</li>
<li>Pin pitch:2mm</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Connectors/JST%282%29-01548.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>
>Name
>Value
+
-
<h3>Spring Terminal- PCB Mount 2 Pin PTH</h3>
tDocu marks the spring arms
<p>Specifications:
<ul><li>Pin count: 4</li>
<li>Pin pitch: 0.1"</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/SpringTerminal.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>
<h3>2 Pin Screw Terminal - 2.54mm</h3>
<p>Specifications:
<ul><li>Pin count:2</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>
>NAME
>VALUE
2 pin poke-home connector
part number 2062-2P from STA
>NAME
>VALUE
>NAME
>VALUE
<h3>Plated Through Hole - 3 Pin</h3>
<p>Specifications:
<ul><li>Pin count:3</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_03</li>
</ul></p>
>NAME
>VALUE
<h3>PTH - 3 Pin Vertical Molex Polarized Header</h3>
<p><b>Datasheet referenced for footprint:</b><a href="http://www.4uconnector.com/online/object/4udrawing/01932.pdf"> 4UCONN part # 01932 </a></p>
<p>Specifications:
<ul><li>Pin count:3</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_03</li>
</ul></p>
>NAME
>VALUE
<h3>Screw Terminal 3.5mm Pitch -3 Pin PTH</h3>
<p>Specifications:
<ul><li>Pin count: 3</li>
<li>Pin pitch: 3.5mm/138mil</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Screw-Terminal-3.5mm.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_03</li>
</ul></p>
>NAME
>VALUE
<h3>Plated Through Hole - 3 Pin Locking Footprint</h3>
Pins are staggered 0.005" off center to lock pins while soldering.
<p>Specifications:
<ul><li>Pin count:3</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_03</li>
</ul></p>
>NAME
>VALUE
<h3>Plated Through Hole - 3 Pin Long Pad w/ Locking Footprint</h3>
Holes are offset 0.005" from center to lock pins in place while soldering.
<p>Specifications:
<ul><li>Pin count:3</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_03</li>
</ul></p>
>NAME
>VALUE
<h3>PTH - 3 Pin Vertical Molex Polarized Header</h3>
Pins are offset 0.005" from center to lock pins in place during soldering.
<p><b>Datasheet referenced for footprint:</b><a href="http://www.4uconnector.com/online/object/4udrawing/01932.pdf"> 4UCONN part # 01932 </a></p>
<p>Specifications:
<ul><li>Pin count:3</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_03</li>
</ul></p>
>NAME
>VALUE
<h3>Screw Terminal 3.5mm Pitch -3 Pin PTH Locking</h3>
Holes are offset 0.007" from center to hold pins in place during soldering.
<p>Specifications:
<ul><li>Pin count: 3</li>
<li>Pin pitch: 3.5mm/138mil</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Screw-Terminal-3.5mm.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_03</li>
</ul></p>
>NAME
>VALUE
<h3>Plated Through Hole - 3 Pin No Silk Outline</h3>
<p>Specifications:
<ul><li>Pin count:3</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_03</li>
</ul></p>
>NAME
>VALUE
<h3>Plated Through Hole - 3 Pin Long Pads</h3>
<p>Specifications:
<ul><li>Pin count:3</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_03</li>
</ul></p>
>NAME
>VALUE
<h3>JST 3 Pin Right Angle Plated Through Hole</h3>
<p>Specifications:
<ul><li>Pin count:3</li>
<li>Pin pitch:2mm</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/ePH.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_03</li>
</ul></p>
+
-
S
>NAME
>VALUE
<h3>Pogo Pins - 3 Pin</h3>
<p>Specifications:
<ul><li>Pin count:3</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_03</li>
</ul></p>
>NAME
>VALUE
<h3>Screw Terminal 5mm Pitch -3 Pin PTH</h3>
<p>Specifications:
<ul><li>Pin count: 3</li>
<li>Pin pitch: 5mm/197mil</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Screw-Terminal-5mm.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_03</li>
</ul></p>
>NAME
>VALUE
<h3>Plated Through Hole - 3 Pin Locking Footprint w/out Silk Outline</h3>
Holes are offset from center 0.005" to lock pins in place while soldering.
<p>Specifications:
<ul><li>Pin count:3</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_03</li>
</ul></p>
>NAME
>VALUE
<h3>JST 3 Pin Right Angle SMT</h3>
<p>Specifications:
<ul><li>Pin count:3</li>
<li>Pin pitch:2mm</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_03</li>
</ul></p>
>NAME
>VALUE
<h3>Plated Through Hole - 3 Pin SMD</h3>
<p>Specifications:
<ul><li>Pin count:3</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_03</li>
</ul></p>
>NAME
>VALUE
<h3>SMD - 3 Pin Right Angle Female Header</h3>
Silk outline of pin location
<p>Specifications:
<ul><li>Pin count:3</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_03</li>
</ul></p>
>NAME
>VALUE
<h3>SMD- 3 Pin Right Angle Male Headers</h3>
No silk outline, but tDocu layer shows pin location.
<p>Specifications:
<ul><li>Pin count:3</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_03</li>
</ul></p>
>NAME
>VALUE
<h3>SMD - 3 Pin Right Angle Male Header w/ Alignment Posts</h3>
<p><b>Datasheet referenced for footprint:</b><a href="http://www.4uconnector.com/online/object/4udrawing/11026.pdf"> 4UCONN part # 11026 </a></p>
<p>Specifications:
<ul><li>Pin count:3</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_03</li>
</ul></p>
>NAME
>VALUE
<h3>JST 3 Pin Vertical Plated Through Hole</h3>
<p>Specifications:
<ul><li>Pin count:3</li>
<li>Pin pitch:2mm</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/ePH.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_03</li>
</ul></p>
+
-
S
>NAME
>VALUE
<h3>SMD - 3 Pin Right Angle Male Header w/ Alignment Posts</h3>
<p><b>Datasheet referenced for footprint:</b><a href="http://www.4uconnector.com/online/object/4udrawing/11026.pdf"> 4UCONN part # 11026 </a></p>
<p>Specifications:
<ul><li>Pin count:3</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_03</li>
</ul></p>
<h3>JST 3 Pin Right Angle Plated Through Hole – NO SILK</h3>
<p>No silkscreen outline. tDoc layer (51) indicates connector footprint.</p>
<p>Specifications:
<ul><li>Pin count:3</li>
<li>Pin pitch:2mm</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/ePH.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_03</li>
</ul></p>
+
-
S
>NAME
>VALUE
<h3>Screw Terminal 3.5mm Pitch -3 Pin PTH – NO SILK</h3>
<p>No silkscreen outline. tDoc layer (51) indicates connector footprint.</p>
<p>Specifications:
<ul><li>Pin count: 3</li>
<li>Pin pitch: 3.5mm/138mil</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Screw-Terminal-3.5mm.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_03</li>
</ul></p>
>NAME
>VALUE
<h3>Plated Through Hole - 4 Pin</h3>
<p>Specifications:
<ul><li>Pin count:4</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_04</li>
</ul></p>
>NAME
>VALUE
<h3>Molex 4-Pin Plated Through-Hole</h3>
<p>Specifications:
<ul><li>Pin count:4</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/2pin_molex_set_19iv10.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_04</li>
</ul></p>
>NAME
>VALUE
<h3>Screw Terminal 3.5mm Pitch -4 Pin PTH</h3>
<p>Specifications:
<ul><li>Pin count: 4</li>
<li>Pin pitch: 3.5mm/138mil</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Screw-Terminal-3.5mm.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_04</li>
</ul></p>
>NAME
>VALUE
<h3>Plated Through Hole - 4 Pin</h3>
<p>Specifications:
<ul><li>Pin count:4</li>
<li>Pin pitch: 1.27mm</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_04</li>
</ul></p>
>NAME
>VALUE
<h3>Plated Through Hole - 4 Pin Locking Footprint</h3>
Pins are offset 0.005" from center to lock pins in place during soldering.
<p>Specifications:
<ul><li>Pin count:4</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_04</li>
</ul></p>
>NAME
>VALUE
<h3>Plated Through Hole - 4 Pin Long Pads w/ Locking Footprint</h3>
Holes are offset 0.005" from center to lock pins in place during soldering.
<p>Specifications:
<ul><li>Pin count:4</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_04</li>
</ul></p>
>NAME
>VALUE
<h3>Molex 4-Pin Plated Through-Hole Locking</h3>
Holes are offset 0.005" from center to hold pins in place during soldering.
<p>Specifications:
<ul><li>Pin count:4</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/2pin_molex_set_19iv10.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_04</li>
</ul></p>
>NAME
>VALUE
<h3>SMD - 4 Pin Right Angle Male Header</h3>
tDocu layer shows pin locations.
<p>Specifications:
<ul><li>Pin count:4</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_04</li>
</ul></p>
>NAME
>VALUE
<h3>Plated Through Hole - 4 Pin Long Pads</h3>
<p>Specifications:
<ul><li>Pin count:4</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_04</li>
</ul></p>
>NAME
>VALUE
<h3>Plated Through Hole - 4 Pin No Silk Outline</h3>
<p>Specifications:
<ul><li>Pin count:4</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_04</li>
</ul></p>
>NAME
>VALUE
<h3>JST Right Angle 4 Pin Plated Through Hole</h3>
<p>Specifications:
<ul><li>Pin count: 4</li>
<li>Pin pitch: 2mm</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/ePH.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_04</li>
</ul></p>
+
-
S
S
>NAME
>VALUE
<h3>Screw Terminal 3.5mm Pitch -4 Pin PTH Locking</h3>
Holes are offset 0.005" from center to hold pins in place during soldering.
<p>Specifications:
<ul><li>Pin count: 4</li>
<li>Pin pitch: 3.5mm/138mil</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Screw-Terminal-3.5mm.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_04</li>
</ul></p>
>NAME
>VALUE
<h3>SMD- 4 Pin Right Angle </h3>
<p>Specifications:
<ul><li>Pin count:4</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_04</li>
</ul></p>
>NAME
>VALUE
<h3>SMD - 4 Pin Vertical Connector</h3>
<p>Specifications:
<ul><li>Pin count:4</li>
<li>SMD Pad count:8</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_04</li>
</ul></p>
>NAME
>VALUE
<h3>SMD - 4 Pin w/ Long Solder Pads</h3>
No silk, but tDocu layer shows pin position.
<p>Specifications:
<ul><li>Pin count:4</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_04</li>
</ul></p>
<h3>JST Vertical 4 Pin Plated Through Hole</h3>
<p>Specifications:
<ul><li>Pin count: 4</li>
<li>Pin pitch: 2mm</li>
</ul></p>
<p><a href="http://www.jst-mfg.com/product/pdf/eng/ePH.pdf">Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_04</li>
</ul></p>
+
-
Y
B
>NAME
>VALUE
<h3>SMD - 4 Pin Right-Angle Female Header</h3>
Silk outline shows header location.
<p>Specifications:
<ul><li>Pin count:4</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_04</li>
</ul></p>
>NAME
>VALUE
Plated Through Hole - 6 Pin
Specifications:
Pin count:6
Pin pitch:0.1"
Example device(s):
CONN_06
Molex 6-Pin Plated Through-Hole
Specifications:
Pin count:6
Pin pitch:0.1"
Datasheet referenced for footprint
Example device(s):
CONN_06
Molex 6-Pin Plated Through-Hole Right Angle
tPlace shows angle of connector.
Specifications:
Pin count:6
Pin pitch:0.1"
Datasheet referenced for footprint
Example device(s):
CONN_06
SMD - 6 Pin Right Angle Male Header
tDocu layer shows pin locations.
Specifications:
Pin count:6
Pin pitch:0.1"
Example device(s):
CONN_06
Plated Through Hole - 6 Pin with Locking Footprint
Holes are offset 0.005" from center, locking pins in place during soldering.
Specifications:
Pin count:6
Pin pitch:0.1"
Example device(s):
CONN_06
Plated Through Hole - 6 Pin with Locking Footprint with Long Pads
Holes are offset 0.005" from center, locking pins in place during soldering.
Specifications:
Pin count:6
Pin pitch:0.1"
Example device(s):
CONN_06
Molex 6-Pin Plated Through-Hole Locking Footprint
Holes are offset 0.005" from center to hold pins in place during soldering.
Specifications:
Pin count:6
Pin pitch:0.1"
Datasheet referenced for footprint
Example device(s):
CONN_06
Molex 6-Pin Plated Through-Hole Right Angle Locking Footprint
Holes are offset 0.005" from center to hold pins in place during soldering.
tPlace shows location of connector.
Specifications:
Pin count:6
Pin pitch:0.1"
Datasheet referenced for footprint
Example device(s):
CONN_06
Plated Through Hole - 6 Pin Locking Header
Includes silk outline for 6 pin female header
Specifications:
Pin count:6
Pin pitch:0.1"
Datasheet referenced for footprint:
Example device(s):
CONN_06
Plated Through Hole - 6 Pin with Long Pads
Specifications:
Pin count:6
Pin pitch:0.1"
Example device(s):
CONN_06
Screw Terminal 3.5mm Pitch -6 Pin PTH
Specifications:
Pin count: 6
Pin pitch: 3.5mm/138mil
Datasheet referenced for footprint
Example device(s):
CONN_06
Header - 6 pin Female SMD
Right angle 0.1"
Specifications:
Pin count:6
Pin pitch:0.1"
Datasheet referenced for footprint:
Example device(s):
CONN_06
6 Pin Holes
No silk, no plating
Specifications:
Pin count:6
Pin pitch:0.1"
Example device(s):
CONN_06
6 Pin SMD Female Header
Specifications:
Pin count:6
Pin pitch:0.1"
Datasheet referenced for footprint:
Example device(s):
CONN_06
6 Pin SMD Female Header
Alternate pin configuration
Specifications:
Pin count:6
Pin pitch:0.1"
Datasheet referenced for footprint:
Example device(s):
CONN_06
6 Pin SMD Female Header - Combined Footprint
Specifications:
Pin count:6
Pin pitch:0.1"
Datasheet referenced for footprint:
Example device(s):
CONN_06
6 Pin SMD Male Header
Specifications:
Pin count:6
Pin pitch:0.1"
Datasheet referenced for footprint:
Example device(s):
CONN_06
JST SH Vertical 6-Pin Connector -SMD
Specifications:
Pin count:6
Pin pitch:1mm
Datasheet referenced for footprint
Example device(s):
CONN_06
EM-406
Plated Through Hole - 6 Pin No Silk Outline
Specifications:
Pin count:6
Pin pitch:0.1"
Example device(s):
CONN_06
Plated Through Hole - 6 Pin
Specifications:
Pin count:6
Pin pitch:1.27mm
Example device(s):
CONN_06
Plated Through Hole
Specifications:
Pin count:2
Pin pitch:0.1"
Example device(s):
CONN_02
Molex 2-Pin Plated Through-Hole
Specifications:
Pin count:2
Pin pitch:0.1"
Datasheet referenced for footprint
Example device(s):
CONN_02
Screw Terminal 3.5mm Pitch - 2 Pin PTH
Specifications:
Pin count: 2
Pin pitch: 3.5mm/138mil
Datasheet referenced for footprint
Example device(s):
CONN_02
JST-Right Angle Male Header SMT
Specifications:
Pin count: 2
Pin pitch: 2mm
Datasheet referenced for footprint
Example device(s):
CONN_02
JST_2MM_MALE
Plated Through Hole
Specifications:
Pin count:2
Pin pitch:0.15"
Example device(s):
CONN_02
JST-Vertical Male Header SMT
Specifications:
Pin count: 2
Pin pitch: 2mm
Datasheet referenced for footprint
Example device(s):
CONN_02
Screw Terminal 5mm Pitch -2 Pin PTH
Specifications:
Pin count: 2
Pin pitch: 5mm/197mil
Datasheet referenced for footprint
Example device(s):
CONN_02
Plated Through Hole - Locking Footprint
Holes are staggered by 0.005" from center to hold pins while soldering.
Specifications:
Pin count:2
Pin pitch:0.1"
Example device(s):
CONN_02
Molex 2-Pin Plated Through-Hole Locking Footprint
Holes are offset from center by 0.005" to hold pins in place during soldering.
Specifications:
Pin count:2
Pin pitch:0.1"
Datasheet referenced for footprint
Example device(s):
CONN_02
Plated Through Hole - Long Pads with Locking Footprint
Pins are staggered by 0.005" from center to hold pins in place while soldering.
Specifications:
Pin count:2
Pin pitch:0.1"
Example device(s):
CONN_02
Screw Terminal 3.5mm Pitch - 2 Pin PTH Locking
Holes are offset from center 0.005" to hold pins in place during soldering.
Specifications:
Pin count: 2
Pin pitch: 3.5mm/138mil
Datasheet referenced for footprint
Example device(s):
CONN_02
Plated Through Hole - Long Pads without Silk Outline
Specifications:
Pin count:2
Pin pitch:0.1"
Example device(s):
CONN_02
Plated Through Hole - No Silk Outline
Specifications:
Pin count:2
Pin pitch:0.1"
Example device(s):
CONN_02
JST 2 Pin Right Angle Plated Through Hole
tDocu indicate polarity for connections that match SparkFun LiPo battery terminations.
Specifications:
Pin count: 2
Pin pitch:2mm
Datasheet referenced for footprint
Example device(s):
CONN_02
Plated Through Hole - 0.1" holes
Specifications:
Pin count:2
Pin pitch:0.2"
Example device(s):
CONN_02
Pogo Pins Connector - No Silk Outline
Specifications:
Pin count:2
Pin pitch:0.1"
Example device(s):
CONN_02
Screw Terminal 3.5mm Pitch - 2 Pin PTH No Silk Outline
Specifications:
Pin count: 2
Pin pitch: 3.5mm/138mil
Datasheet referenced for footprint
Example device(s):
CONN_02
JST 2 Pin Right Angle Plated Through Hole- No Silk
tDocu indicate polarity for connections that match SparkFun LiPo battery terminations.
No silk outline of connector.
Specifications:
Pin count: 2
Pin pitch:2mm
Datasheet referenced for footprint
Example device(s):
CONN_02
JST 2 Pin Right Angle Plated Through Hole - KIT
tDocu indicate polarity for connections that match SparkFun LiPo battery terminations.
This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad.
This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side.
Specifications:
Pin count: 2
Pin pitch:2mm
Datasheet referenced for footprint
Example device(s):
CONN_02
Spring Terminal- PCB Mount 2 Pin PTH
tDocu marks the spring arms
Specifications:
Pin count: 4
Pin pitch: 0.1"
Datasheet referenced for footprint
Example device(s):
CONN_02
2 Pin Screw Terminal - 2.54mm
Specifications:
Pin count:2
Pin pitch:0.1"
Example device(s):
CONN_02
2 pin poke-home connector
part number 2062-2P from STA
Plated Through Hole - 3 Pin
Specifications:
Pin count:3
Pin pitch:0.1"
Example device(s):
CONN_03
PTH - 3 Pin Vertical Molex Polarized Header
Datasheet referenced for footprint: 4UCONN part # 01932
Specifications:
Pin count:3
Pin pitch:0.1"
Example device(s):
CONN_03
Screw Terminal 3.5mm Pitch -3 Pin PTH
Specifications:
Pin count: 3
Pin pitch: 3.5mm/138mil
Datasheet referenced for footprint
Example device(s):
CONN_03
Plated Through Hole - 3 Pin Locking Footprint
Pins are staggered 0.005" off center to lock pins while soldering.
Specifications:
Pin count:3
Pin pitch:0.1"
Example device(s):
CONN_03
Plated Through Hole - 3 Pin Long Pad w/ Locking Footprint
Holes are offset 0.005" from center to lock pins in place while soldering.
Specifications:
Pin count:3
Pin pitch:0.1"
Example device(s):
CONN_03
PTH - 3 Pin Vertical Molex Polarized Header
Pins are offset 0.005" from center to lock pins in place during soldering.
Datasheet referenced for footprint: 4UCONN part # 01932
Specifications:
Pin count:3
Pin pitch:0.1"
Example device(s):
CONN_03
Screw Terminal 3.5mm Pitch -3 Pin PTH Locking
Holes are offset 0.007" from center to hold pins in place during soldering.
Specifications:
Pin count: 3
Pin pitch: 3.5mm/138mil
Datasheet referenced for footprint
Example device(s):
CONN_03
Plated Through Hole - 3 Pin No Silk Outline
Specifications:
Pin count:3
Pin pitch:0.1"
Example device(s):
CONN_03
Plated Through Hole - 3 Pin Long Pads
Specifications:
Pin count:3
Pin pitch:0.1"
Example device(s):
CONN_03
JST 3 Pin Right Angle Plated Through Hole
Specifications:
Pin count:3
Pin pitch:2mm
Datasheet referenced for footprint
Example device(s):
CONN_03
Pogo Pins - 3 Pin
Specifications:
Pin count:3
Example device(s):
CONN_03
Screw Terminal 5mm Pitch -3 Pin PTH
Specifications:
Pin count: 3
Pin pitch: 5mm/197mil
Datasheet referenced for footprint
Example device(s):
CONN_03
Plated Through Hole - 3 Pin Locking Footprint w/out Silk Outline
Holes are offset from center 0.005" to lock pins in place while soldering.
Specifications:
Pin count:3
Pin pitch:0.1"
Example device(s):
CONN_03
JST 3 Pin Right Angle SMT
Specifications:
Pin count:3
Pin pitch:2mm
Example device(s):
CONN_03
Plated Through Hole - 3 Pin SMD
Specifications:
Pin count:3
Example device(s):
CONN_03
SMD - 3 Pin Right Angle Female Header
Silk outline of pin location
Specifications:
Pin count:3
Pin pitch:0.1"
Example device(s):
CONN_03
SMD- 3 Pin Right Angle Male Headers
No silk outline, but tDocu layer shows pin location.
Specifications:
Pin count:3
Pin pitch:0.1"
Example device(s):
CONN_03
SMD - 3 Pin Right Angle Male Header w/ Alignment Posts
Datasheet referenced for footprint: 4UCONN part # 11026
Specifications:
Pin count:3
Pin pitch:0.1"
Example device(s):
CONN_03
JST 3 Pin Vertical Plated Through Hole
Specifications:
Pin count:3
Pin pitch:2mm
Datasheet referenced for footprint
Example device(s):
CONN_03
SMD - 3 Pin Right Angle Male Header w/ Alignment Posts
Datasheet referenced for footprint: 4UCONN part # 11026
Specifications:
Pin count:3
Pin pitch:0.1"
Example device(s):
CONN_03
JST 3 Pin Right Angle Plated Through Hole – NO SILK
No silkscreen outline. tDoc layer (51) indicates connector footprint.
Specifications:
Pin count:3
Pin pitch:2mm
Datasheet referenced for footprint
Example device(s):
CONN_03
Screw Terminal 3.5mm Pitch -3 Pin PTH – NO SILK
No silkscreen outline. tDoc layer (51) indicates connector footprint.
Specifications:
Pin count: 3
Pin pitch: 3.5mm/138mil
Datasheet referenced for footprint
Example device(s):
CONN_03
Plated Through Hole - 4 Pin
Specifications:
Pin count:4
Pin pitch:0.1"
Example device(s):
CONN_04
Molex 4-Pin Plated Through-Hole
Specifications:
Pin count:4
Pin pitch:0.1"
Datasheet referenced for footprint
Example device(s):
CONN_04
Screw Terminal 3.5mm Pitch -4 Pin PTH
Specifications:
Pin count: 4
Pin pitch: 3.5mm/138mil
Datasheet referenced for footprint
Example device(s):
CONN_04
Plated Through Hole - 4 Pin
Specifications:
Pin count:4
Pin pitch: 1.27mm
Example device(s):
CONN_04
Plated Through Hole - 4 Pin Locking Footprint
Pins are offset 0.005" from center to lock pins in place during soldering.
Specifications:
Pin count:4
Pin pitch:0.1"
Example device(s):
CONN_04
Plated Through Hole - 4 Pin Long Pads w/ Locking Footprint
Holes are offset 0.005" from center to lock pins in place during soldering.
Specifications:
Pin count:4
Pin pitch:0.1"
Example device(s):
CONN_04
Molex 4-Pin Plated Through-Hole Locking
Holes are offset 0.005" from center to hold pins in place during soldering.
Specifications:
Pin count:4
Pin pitch:0.1"
Datasheet referenced for footprint
Example device(s):
CONN_04
SMD - 4 Pin Right Angle Male Header
tDocu layer shows pin locations.
Specifications:
Pin count:4
Pin pitch:0.1"
Example device(s):
CONN_04
Plated Through Hole - 4 Pin Long Pads
Specifications:
Pin count:4
Pin pitch:0.1"
Example device(s):
CONN_04
Plated Through Hole - 4 Pin No Silk Outline
Specifications:
Pin count:4
Pin pitch:0.1"
Example device(s):
CONN_04
JST Right Angle 4 Pin Plated Through Hole
Specifications:
Pin count: 4
Pin pitch: 2mm
Datasheet referenced for footprint
Example device(s):
CONN_04
Screw Terminal 3.5mm Pitch -4 Pin PTH Locking
Holes are offset 0.005" from center to hold pins in place during soldering.
Specifications:
Pin count: 4
Pin pitch: 3.5mm/138mil
Datasheet referenced for footprint
Example device(s):
CONN_04
SMD- 4 Pin Right Angle
Specifications:
Pin count:4
Pin pitch:0.1"
Example device(s):
CONN_04
SMD - 4 Pin Vertical Connector
Specifications:
Pin count:4
SMD Pad count:8
Pin pitch:0.1"
Example device(s):
CONN_04
SMD - 4 Pin w/ Long Solder Pads
No silk, but tDocu layer shows pin position.
Specifications:
Pin count:4
Pin pitch:0.1"
Example device(s):
CONN_04
JST Vertical 4 Pin Plated Through Hole
Specifications:
Pin count: 4
Pin pitch: 2mm
Datasheet referenced for footprint
Example device(s):
CONN_04
SMD - 4 Pin Right-Angle Female Header
Silk outline shows header location.
Specifications:
Pin count:4
Pin pitch:0.1"
Example device(s):
CONN_04
<h3>6 Pin Connection</h3>
>VALUE
>NAME
<h3>2 Pin Connection</h3>
>VALUE
>NAME
<h3>3 Pin Connection</h3>
>VALUE
>NAME
<h3>4 Pin Connection</h3>
>VALUE
>NAME
<h3>Multi connection point. Often used as Generic Header-pin footprint for 0.1 inch spaced/style header connections</h3>
<p></p>
<b>On any of the 0.1 inch spaced packages, you can populate with these:</b>
<ul>
<li><a href="https://www.sparkfun.com/products/116"> Break Away Headers - Straight</a> (PRT-00116)</li>
<li><a href="https://www.sparkfun.com/products/553"> Break Away Male Headers - Right Angle</a> (PRT-00553)</li>
<li><a href="https://www.sparkfun.com/products/115"> Female Headers</a> (PRT-00115)</li>
<li><a href="https://www.sparkfun.com/products/117"> Break Away Headers - Machine Pin</a> (PRT-00117)</li>
<li><a href="https://www.sparkfun.com/products/743"> Break Away Female Headers - Swiss Machine Pin</a> (PRT-00743)</li>
<li><a href="https://www.sparkfun.com/products/9280"> Arduino Stackable Header - 6 Pin</a> (PRT-09280)</li>
</ul>
<p></p>
<b> For SCREWTERMINALS and SPRING TERMINALS visit here:</b>
<ul>
<li><a href="https://www.sparkfun.com/search/results?term=Screw+Terminals"> Screw Terimnals on SparkFun.com</a> (5mm/3.5mm/2.54mm spacing)</li>
</ul>
<p></p>
<b>This device is also useful as a general connection point to wire up your design to another part of your project. Our various solder wires solder well into these plated through hole pads.</b>
<ul>
<li><a href="https://www.sparkfun.com/products/11375"> Hook-Up Wire - Assortment (Stranded, 22 AWG)</a> (PRT-11375)</li>
<li><a href="https://www.sparkfun.com/products/11367"> Hook-Up Wire - Assortment (Solid Core, 22 AWG)</a> (PRT-11367)</li>
<li><a href="https://www.sparkfun.com/categories/141"> View the entire wire category on our website here</a></li>
<p></p>
</ul>
<h3>Multi connection point. Often used as Generic Header-pin footprint for 0.1 inch spaced/style header connections</h3>
<p></p>
<b>On any of the 0.1 inch spaced packages, you can populate with these:</b>
<ul>
<li><a href="https://www.sparkfun.com/products/116"> Break Away Headers - Straight</a> (PRT-00116)</li>
<li><a href="https://www.sparkfun.com/products/553"> Break Away Male Headers - Right Angle</a> (PRT-00553)</li>
<li><a href="https://www.sparkfun.com/products/115"> Female Headers</a> (PRT-00115)</li>
<li><a href="https://www.sparkfun.com/products/117"> Break Away Headers - Machine Pin</a> (PRT-00117)</li>
<li><a href="https://www.sparkfun.com/products/743"> Break Away Female Headers - Swiss Machine Pin</a> (PRT-00743)</li>
</ul>
<p></p>
<b> For SCREWTERMINALS and SPRING TERMINALS visit here:</b>
<ul>
<li><a href="https://www.sparkfun.com/search/results?term=Screw+Terminals"> Screw Terimnals on SparkFun.com</a> (5mm/3.5mm/2.54mm spacing)</li>
</ul>
<p></p>
<b>This device is also useful as a general connection point to wire up your design to another part of your project. Our various solder wires solder well into these plated through hole pads.</b>
<ul>
<li><a href="https://www.sparkfun.com/products/11375"> Hook-Up Wire - Assortment (Stranded, 22 AWG)</a> (PRT-11375)</li>
<li><a href="https://www.sparkfun.com/products/11367"> Hook-Up Wire - Assortment (Solid Core, 22 AWG)</a> (PRT-11367)</li>
<li><a href="https://www.sparkfun.com/categories/141"> View the entire wire category on our website here</a></li>
<p></p>
</ul>
<p></p>
<b>Special notes:</b>
Molex polarized connector foot print use with: PRT-08233 with associated crimp pins and housings.<br><br>
2.54_SCREWTERM for use with PRT-10571.<br><br>
3.5mm Screw Terminal footprints for PRT-08084<br><br>
5mm Screw Terminal footprints for use with PRT-08432
<h3>Multi connection point. Often used as Generic Header-pin footprint for 0.1 inch spaced/style header connections</h3>
<p></p>
<b>On any of the 0.1 inch spaced packages, you can populate with these:</b>
<ul>
<li><a href="https://www.sparkfun.com/products/116"> Break Away Headers - Straight</a> (PRT-00116)</li>
<li><a href="https://www.sparkfun.com/products/553"> Break Away Male Headers - Right Angle</a> (PRT-00553)</li>
<li><a href="https://www.sparkfun.com/products/115"> Female Headers</a> (PRT-00115)</li>
<li><a href="https://www.sparkfun.com/products/117"> Break Away Headers - Machine Pin</a> (PRT-00117)</li>
<li><a href="https://www.sparkfun.com/products/743"> Break Away Female Headers - Swiss Machine Pin</a> (PRT-00743)</li>
<li><a href="https://www.sparkfun.com/products/13875"> Stackable Header - 3 Pin (Female, 0.1")</a> (PRT-13875)</li>
</ul>
<p></p>
<b> For SCREWTERMINALS and SPRING TERMINALS visit here:</b>
<ul>
<li><a href="https://www.sparkfun.com/search/results?term=Screw+Terminals"> Screw Terimnals on SparkFun.com</a> (5mm/3.5mm/2.54mm spacing)</li>
</ul>
<p></p>
<b>This device is also useful as a general connection point to wire up your design to another part of your project. Our various solder wires solder well into these plated through hole pads.</b>
<ul>
<li><a href="https://www.sparkfun.com/products/11375"> Hook-Up Wire - Assortment (Stranded, 22 AWG)</a> (PRT-11375)</li>
<li><a href="https://www.sparkfun.com/products/11367"> Hook-Up Wire - Assortment (Solid Core, 22 AWG)</a> (PRT-11367)</li>
<li><a href="https://www.sparkfun.com/categories/141"> View the entire wire category on our website here</a></li>
<p></p>
</ul>
<p></p>
<b>Special notes:</b>
<p> </p>
<p> </p> Molex polarized connector foot print use with SKU : PRT-08232 with associated crimp pins and housings.
<h3>Multi connection point. Often used as Generic Header-pin footprint for 0.1 inch spaced/style header connections</h3>
<p></p>
<b>On any of the 0.1 inch spaced packages, you can populate with these:</b>
<ul>
<li><a href="https://www.sparkfun.com/products/116"> Break Away Headers - Straight</a> (PRT-00116)</li>
<li><a href="https://www.sparkfun.com/products/553"> Break Away Male Headers - Right Angle</a> (PRT-00553)</li>
<li><a href="https://www.sparkfun.com/products/115"> Female Headers</a> (PRT-00115)</li>
<li><a href="https://www.sparkfun.com/products/117"> Break Away Headers - Machine Pin</a> (PRT-00117)</li>
<li><a href="https://www.sparkfun.com/products/743"> Break Away Female Headers - Swiss Machine Pin</a> (PRT-00743)</li>
</ul>
<p></p>
<b> For SCREWTERMINALS and SPRING TERMINALS visit here:</b>
<ul>
<li><a href="https://www.sparkfun.com/search/results?term=Screw+Terminals"> Screw Terimnals on SparkFun.com</a> (5mm/3.5mm/2.54mm spacing)</li>
</ul>
<p></p>
<b>This device is also useful as a general connection point to wire up your design to another part of your project. Our various solder wires solder well into these plated through hole pads.</b>
<ul>
<li><a href="https://www.sparkfun.com/products/11375"> Hook-Up Wire - Assortment (Stranded, 22 AWG)</a> (PRT-11375)</li>
<li><a href="https://www.sparkfun.com/products/11367"> Hook-Up Wire - Assortment (Solid Core, 22 AWG)</a> (PRT-11367)</li>
<li><a href="https://www.sparkfun.com/categories/141"> View the entire wire category on our website here</a></li>
<p></p>
</ul>
<p></p>
<b>Special notes:</b>
<p> </p> Molex polarized connector foot print use with SKU : PRT-08231 with associated crimp pins and housings. 1MM SMD Version SKU: PRT-10208
<b>Supply Symbols</b><p>
GND, VCC, 0V, +5V, -5V, etc.<p>
Please keep in mind, that these devices are necessary for the
automatic wiring of the supply signals.<p>
The pin name defined in the symbol is identical to the net which is to be wired automatically.<p>
In this library the device names are the same as the pin names of the symbols, therefore the correct signal names appear next to the supply symbols in the schematic.<p>
<author>Created by librarian@cadsoft.de</author>
>VALUE
>VALUE
<b>SUPPLY SYMBOL</b>
<b>SUPPLY SYMBOL</b>
Since Version 8.2, EAGLE supports online libraries. The ids
of those online libraries will not be understood (or retained)
with this version.
Since Version 8.3, EAGLE supports URNs for individual library
assets (packages, symbols, and devices). The URNs of those assets
will not be understood (or retained) with this version.
Since Version 8.3, EAGLE supports the association of 3D packages
with devices in libraries, schematics, and board files. Those 3D
packages will not be understood (or retained) with this version.
Since Version 9.5, EAGLE supports persistent groups with
schematics, and board files. Those persistent groups
will not be understood (or retained) with this version.
Since Version 8.4, EAGLE supports properties for SPICE simulation.
Probes in schematics and SPICE mapping objects found in parts and library devices
will not be understood with this version. Update EAGLE to the latest version
for full support of SPICE simulation.